About UsProductsIndustries We ServeServicesEnquiryE-BrochureContact Us
 
PRODUCTS / GAS MIXTURES / CALIBRATION GAS MIXTURES / APPLICATION

Hygrometry

The level of moisture in certain process streams can be critical to successful plant operation. Confidence in the accuracy of moisture measurement devices is greatly enhanced by regular calibration, using gas transfer standards. Proton offers such calibration standards at moisture concentration levels as low as 1 PPM.

Service to Analytical Laboratories

Proton offers wide range of PROGAS grade gases for chromatographs, calibration, sample preparation, spectrometry, spectrography etc.

Special Carrirer Gas Mixtures

Nuclear Counter Mixture
  • 5% CH4 + 95% Argon
  • 1.3% n-Butane + 98.7 Helium (Q gas)
  • 7.5% Ch4 + 92.5% Argon
  • .95% Iso Butane + 99.05% Helium
  • 10% Ch4 + 90% Argon
  • 1.5 Propane + 98.5% Helium

Electron Capture flow Gas
  • 5% CH4 + 95% Argon
  • 8.5% H2 + 91.5% helium

Spark Chamber Mixture
  • 90% Neon + 10% Helium
  • 75% Neon + 25 Helium

FID Fuel Gas
  • 40% H2 + 60% N2
  • 40% H2 + 60% Helium

Service to Medical Profession

Proton offers a wide range of gas and gas mixtures for the more specialist application in modern medicine. Following are the details of most commonly used mixtures, however, if your exact requirements are not shown please feel free to contact us.

Some Typical Mixtures

Department of Health Medical Product Licenses
  • 5% CO2 + 95% O2
  • 5% CO2 + 95% Air
  • 10% CO2 + 90% O2
  • 09% He +35% 02 +56 n2
  • 20% CO2 + 80% O2

Lung Diffusion Mixture
  • 0.28% CO+ 14% He +18% O2 +67.72% N2
  • 0.28% CO+ 09% He +19% O2 +71.72% N2
  • 0.30% CO+ 10% He +18.8% O2 +70.9% N2
  • 0.30% CO+ 10% He +21% O2 +68.70% N2

Biological Atmosphere for Culture Growth

Aerobic Growth
  • 1-10% Co2 + Bal O2

Anaerobic Growth
  • 5% H2 + 10% CO2 + 85% N2
  • 10% H2 + 10% CO2 + 80% N2
  • 10% H2 + 5% CO2 + 85% N2

Special Gases for Surgical Applications

Laser Mixture
  • 4.5% CO2 + 13.5% N2 + 82 % He
  • 09 % CO2 + 13.5% N2 + 77.5% He
  • 07% CO2 + 14.0 % N2 + 79% He
     


Food Fresh Gases

Premix cylinder is supplied by Proton, any mixture of CO2, N2 and O2 can be ordered or you can choose one of following mixture.

20% CO2 + 80% O2 25% CO2 + 75% N2 30% CO2 + 70% N2
35% CO2 + 65% N2 40% CO2 + 60% N2 0% CO2 + 30% O2 + 40 % N2
5% CO2 + 35% O2 + 30 % N2 40% CO2 + 30% O2 + 30 % N2 10% CO2 + 05% O2 + 85 % N2
05% CO2 + 05% O2 + 90 % N2    

Laser Gases

Proton offers a complete range of products for laser system manufacturers and end users.

Co2 laser material processing

Premixed gases are supplied in various standard mixtures to suit the needs of different laser applications used in the market. Proton will be pleased to manufacture other customer specified mixtures also.

CO2 Nitrogen Helium
4.5% 13.5% Balance
9.0% 13.5% Balance
5.0% 55.0% Balance
6.0% 20.0% Balance
6.0% 10.0% Balance
7.0% 18.0% Balance
7.0% 14.0% Balance
14.0% 12.0% Balance

Co2 laser marking

CO CO2 N2 He
2% 8% 8% Balance
4% 8% 8% Balance
2% 8% 16% Balance
4% 8% 16% Balance
5% 16% 16% Balance
2% 13% 16% Balance

Service To Automotive Industries

Speciality gases are uniquely placed to supply the complete range of gases and gas mixtures required by Indian Automotive Industry. These products are used as standards to determine performance in exhaust emission analysis evaporative loss testing field surveillance, engine performance and efficiency and crank case emission. The range extends from stable traceable mixtures for calibration of sensitive emission analysis equipment to high purity air fuel gas. Nitrogen is used as carrier gas for such equipment.

Type of Instruments

Type of Gas Required

Engine Tuning / Auto emission

Calibration Gas Mixture / Progas Grade Gases

Standard mixtures available with us

Component Balance Gas Range
CO2 Nitrogen 1.0 ppm - 25%
Hexane Nitrogen 50 ppm - 1000 ppm
Methane Air 2.5 ppm - 2.5%
Methane Nitrogen 1.0 ppm - 5%
Oxygen Nitrogen 1% - 25%
Propane Air 1ppm - 1.1%
Propane Nitrogen 1ppm - 3%
Carbon Monoxide Nitrogen 1.0ppm - 25%
Carbon Monoxide Air 1.0ppm - 3.1%
Nitric Oxide Nitrogen 3.5ppm - 8000ppm

Service To Petrochemical and Refineries

Calibration gases required by Indian refineries and petrochemical industries are complex and varied. We aim to supply a quality product whatever the application. Investment in new plant, equipment and analytical facilities ensures that customized calibration standards are supplied as per specification on time. Utilization of just in time principles of manufacture has established the most efficient manufacturing structure to reduce actual lead times significantly.

Process steam calibration

Blends of Hydrocarbon are prepared in the gaseous phase for the accurate and repeatable calibration requirements. Most are supplied as certified standards. Since the potential range of blend is almost infinite most are prepared to customer order.

Health Hazard

Poisonous gases

The poisonous effect can be divided into three main groups

  • Asphyxiates - which are effecting the oxygen up take viz CO2, N2 CO and HCN.
  • Irritating Gases - Gases which are irritating the organism viz NH3 CL2.
  • Central Effective Gas - which are affecting the central nervous system viz different hydrocarbons / aromatics.

Threshold Limit Value

Maximum Exposure Level of all the toxic gases is measured as threshold limit value TLV. TLV is the time weighted average concentration of an airborne substance that represents the condition under which generally believed, all workers may be exposed to a normal eight hours five day week without suffering adverse effect.

Bulk Gases

Pure & Carrier Gases

Rare Gases
Speciality Gases
Gas Mixtures / Calibration
Gas Mixtures
Traceability
Process Gases
Calibration Gases
Application
Gas Handling Equipments

Packaging Option